04-13-2011 07:00 PM
Our company just bought a Linksys E3000 wireless router. So we plug it into out Vlan 10 (192.168.10.0/24), make the AP router to static (WAN IP) to 192.168.10.2 (GW= .1) and the wireless users can get an ip from our DHCP and all is working well. But we wanted to access the AP remotely on other VLAN and we cannot do so. The client user's pc can be pinged but the AP/router cannot be seen. The management remote access is already configured. Also I noticed that we can only get into the gui on the router's ip address (LAN IP) and cannot set it same range with the WAN IP. NAT is already disabled...
hope someone could help us how to have a remote access on different subnets, we got no filter or ACL so each vlan can see each other...
04-14-2011 10:34 AM
For doing the Remote management first you have to change the default password to something of your choice .
Follow this link to Enable the remote management on you router .
What is the Internet IP Address on the Status of your router ?