Reply
ferris0000
Posts: 1
Registered: ‎06-11-2007

Linksys WRT54g v5 firmware

I tried to reset my router to factory defaults through the administration panel.  After a couple minutes of waiting, I tried to access the panel at the default address 192.168.1.1 and nothing came up.  I tried to hold down the reset button and it had no effect.  How do I replace the firmware now, or what else am I doing wrong that I may not realize?
great_white
Posts: 2,324
Registered: ‎09-07-2006

Re: Linksys WRT54g v5 firmware

go to ftp.linksys.com/pub/network and download the tftp.exe utility... use this utility to upgrade the firmware of the router...here, the server is router's ip add , password is the router password  and browse the firmware file and click upgrade...after the firmware upgrade , reset and reconfigure the router ..
kittytom200x
Posts: 1
Registered: ‎06-12-2007

Re: Linksys WRT54g v5 firmware



great_white wrote:
go to ftp.linksys.com/pub/network and download the tftp.exe utility... use this utility to upgrade the firmware of the router...here, the server is router's ip add , password is the router password and browse the firmware file and click upgrade...after the firmware upgrade , reset and reconfigure the router ..



I am having a similar problem, is there anyway to do this on a Mac?