Reply
rickers
Posts: 1
Registered: ‎06-01-2007

Making my connection "Secure"

I've just recently moved and rehooked up my wireless router.  I'm connected to the internet but my connection is unsecure.  I would really like to know how to create a secure connection with a password like I used to have.  If anyone could give me some step by step directions that'd be great.  Thanks.
Posts: 66
Registered: ‎05-28-2007

Re: Making my connection "Secure"

Check the faq section at the top of this page. There is a detailed explanation there.
toomanydonuts
Posts: 6,365
Registered: ‎09-16-2006

Re: Making my connection "Secure"

Which router are you using?
 
To set up wireless security, you must use a computer that is wired to the router.

Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" section of the router's setup pages, located at 192.168.1.1

First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".

Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.

To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.

Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:

WEP - poor (see note below)
WPA (sometimes called PSK) - good
WPA2 (sometimes called PSK2) - best

WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).

The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.

Retest your system and verify that your wireless Internet connection is still working correctly.

For additional security, on many routers, you can limit wireless access to just the MAC addresses of the wireless devices that you own. If possible, you should also use this feature.

And don't forget to give your router a new login password.

Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.

Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.

One additional issue is that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.

Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.
AuntyLani
Posts: 1
Registered: ‎07-01-2011

Re: Making my connection "Secure"

My SRX200 lnksys has never been secured on my home network.  Please tell me how I can do that.  I have tried before but have been unable to do so.

Expert
iamgiantherockstar
Posts: 1,527
Registered: ‎03-19-2009

Re: Making my connection "Secure"

Hi AuntyLani and welcome to the forums!

 

Please click on the link below for instructions on how to secure your network.


Setting-Up Wireless Security on a Linksys Router


Beach19970
Posts: 3
Registered: ‎07-03-2011

Re: Making my connection "Secure"

How do I disable the default unsecure wireless connection (Linksys G) now that I have a password secured WPA2 connection set up?

Expert
iamgiantherockstar
Posts: 1,527
Registered: ‎03-19-2009

Re: Making my connection "Secure"

Hi Beach19970 and welcome to the forums!

 

I don't really understand when you say "i want to disable the default unsecure connection now that I have a password secured connection set up".

 

That makes me think that you have 2 connections, meaning 2 routers. One secured and one unsecured. If you have a secured connection already, people can't connect to that. If you already changed the router's settings to another one (different ssid, WPA2) then that is your default connection. Let me know if we are on the same page here.