02-14-2009 12:50 PM
Download Firmware 3.02 MB for your WRT310N router...
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
02-15-2009 07:39 PM
Weird, it was there a couple days ago - I'm running it. You can grab it at http://downloads.linksysbycisco.com/downloads/FW_WRT310N_v1.0.07.014-LS-HND_US_1201.bin
That link isn't working. Any luck on this new firmware? Does it improve anything?
10-14-2010 02:40 AM
By going to
I was able to get at the newer version link:
for my version 1.0 WRT310N.
Lame lame lame that they have unmatching pages!
10-14-2010 11:33 AM
I checked both links and they are the same given that you select V1.
Eitherway, glad that you have your 310N updated.