01-02-2011 02:08 AM
I attempted to upgrade the firmware on the WRT54G2 V1 (the newer, slim black model) but it failed. I let the upgrade run for about 10 minutes and it just sat there and link to router disconnected I run ping for 192.168.1.1 but response is "DESTINATION HOST UNREACHABLE". The router is now completely unusable and the ALL LAN ports lights are ON and Internet light is also ON.
01-02-2011 12:02 PM
What firmware was the router on? What firmware level did you attempt to install?
This router used to stop working intermittently. As per one of the suggestions on a blog I was trying to reinstall the same firmware 184.108.40.206 (I think the last available firmware) again on the router.
As of now whenever I connect power either All Four LAN lights and Internet light lit up or some of the LAN lights lit up. No response to hard reset anymore.
01-02-2011 06:55 PM
Sorry! Totally my fault! Wrong buffer pasted... ;-(. I apologize....
Let's try this again.
01-03-2011 03:24 PM
By the time you replied I used dd-wrt guideline and tried VxWorksKiller-G2V1-new.bin on router. I'm not sure how to proceed further. The router symptoms are:
1. NO power on light
2. All LAN ports light ON
3. Internet connection light ON
4. No responce to ping
Is there a hope. I've not tried the last two links sent as of now, will try tonight. One of them expects blinking poweron lights, can't use it.
03-12-2012 03:42 AM
Hello, I have the same problem... I already try to hard reset but with no Luck.. I have the lan 4 lights ON but only one cable connect to Port 1.. I have the Wan light ON to.. On the computer says that no cable is connected.. Do you solve your problem? what do you do?