11-18-2011 05:16 AM - edited 11-18-2011 05:21 AM
I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status.
I've checked the Firmware already and i'm using the very last one available on the cisco web site.
I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".
Do you have any clues ?
Thanks very much in advance
Solved! Go to Solution.
11-18-2011 03:03 PM
Is this the firmware version that you have Ver.2.00.01.15?
To verify that what you have on your screen is your own router, on a wired computer clear your browsing history or use another browser. Double check that your computer is connected to this router model. If all else fail, reflash the firmware, reset and reconfigure your router.
11-18-2011 10:32 PM - edited 11-18-2011 10:37 PM
04-22-2013 07:48 PM
This should be in the FAQs and the user manual.
Looking at the user manual it does not indicate that home defender needs to be disabled.
04-22-2013 08:31 PM