11-07-2011 05:10 PM
When I type the routers IP address in teh brower window, nothing happens so I cannot access the router setup. I have a WRT110. What am I missing. I was able to do that when I first setup the router.
11-07-2011 05:53 PM
Yes, the computer is connected directly to the router via the ethernet cable. I know I was able to do it before when I first bought it and I don't think anything has changed.
11-07-2011 05:55 PM
Try to check your IP address. It should be on the range of 192.168.1.1xx. If it is, try to ping the router.
Start > run > type cmd > enter > type ping (space) 192.168.1.1 > hit enter > you should get 4 replies.
11-10-2011 11:54 PM
Try hard resetting your router.
*Locate the reset pinhole somewhere at the back of your router and take pin, press for 30 seconds.
*unplug the router for another 30 seconds
*Once you replug the router, wait until the router's LED lights stop blinking.
Then you can access the router's GUI by typing 192.168.1.1 on your web browser's address bar. Don't forget, the default password is "admin". leave the username blank.