Reply
ljorchi
Posts: 4
Registered: ‎04-21-2009

how to connect a router to my PS3

[ Edited ]
When I test the connection to the internet on my PS3, it fails. It says that obtaining the IP address failed.                                                               (WIRELESS!!!!!!)
Message Edited by ljorchi on 04-22-2009 05:49 PM
Elson23
Posts: 36
Registered: ‎03-26-2009

Re: how to connect a router to my PS3

wired or wireless???

 

u should assign an IP to ur PS3 instead... so everytime u turn it on u dont have to get a new IP address from the router...

scrooge
Posts: 2,610
Registered: ‎09-07-2006

Re: how to connect a router to my PS3

Try this :

Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...

On the set-up tab change the MTU Size to 1452 and click Save Settings...

Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...

Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...

1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

3) On the third line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

4) On the fourth line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

5) On the fifth line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

6) On the sixth line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings

7) Now assign the given ip address on your PlayStation
ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...

8) Also assign the dns addresses on the PlayStation
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1

9) Turn off your modem, router, and PlayStation...Wait for a minute...

10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...

ljorchi
Posts: 4
Registered: ‎04-21-2009

Re: how to connect a router to my PS3

Thanks, but the password admin doesn't let me log on
Elson23
Posts: 36
Registered: ‎03-26-2009

Re: how to connect a router to my PS3

did u leave the username blank??
ljorchi
Posts: 4
Registered: ‎04-21-2009

Re: how to connect a router to my PS3

Yes I did leave the username blank 
Elson23
Posts: 36
Registered: ‎03-26-2009

Re: how to connect a router to my PS3

u sure u never gave it a password of ur own???
ljorchi
Posts: 4
Registered: ‎04-21-2009

Re: how to connect a router to my PS3

im sure