Reply
tomslapnicker
Posts: 1
Registered: ‎09-29-2008

mtu failure for my single xbox360

ok so ive tried everything calling xbox support wich was a wonderfull waste of an hour but my xbox 360 keeps having mtu failure it just started happening out of the blue dont know whats going on i have the BEFW11S4 i need help i wana take a hammer to the thing cause i know its not my internet or xbox
Shaman
Posts: 2
Registered: ‎09-29-2008

Re: mtu failure for my single xbox360

[ Edited ]
I'm having the same problem with my WRT54G v8... out of the blue like you said, it just started getting mtu failiure. have tried everything that would normally fix network problems.... im stumped. i thought it might be xbox live down...

Message Edited by Shaman on 09-29-2008 10:22 PM
Shaman
Posts: 2
Registered: ‎09-29-2008

Re: mtu failure for my single xbox360

ok, so apparently xbox live is down today... im glad i spent so much time on this.
Ricewind
Posts: 3,013
Registered: ‎09-07-2006

Re: mtu failure for my single xbox360

Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
  primary dns :- 4.2.2.2
  secondary dns :- 192.168.1.1
6) Please try to test your xbox live.