Showing results for 
Search instead for 
Do you mean 
Reply
sjoerd327
Posts: 5
Registered: ‎09-04-2010
Accepted Solution

not fully loaded configuration screen of a WRT54G v5 wifi router

ey guys,

 

i have a WRT54G v5 router here.

it works fine (2 wired PC's attached and multiple wifi)

but i want to change some simple configurations (like put a password on the wifi internet)

 

the problem is that the configuration page(192.168.1.1) doesn't open correctly.

i tried it on several computers, wired/wifi and multiple browsers.(chrome&IE)

reset and removing the powercord for multiple minutes doesn't resolve the problem.

(master reset to factory settings also doesn't work)

 

can anyone help me with this problem?!

 

firmware update is also a problem since you need to go to the configuration page for this.

 

 

Expert
iamgiantherockstar
Posts: 1,527
Registered: ‎03-19-2009

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

Hi sjoerd327 and welcome to the forums!

 

What do you mean by it doesn't open correctly? Does it get to the point where it asks you for a username and a password or it doesn't even get to that?

sjoerd327
Posts: 5
Registered: ‎09-04-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

ey,

 

it ask for username and password and then it opens the the config screen of the router.

but it doesn't fully load(like an IE page that loads for like 10% or something)

 

in the left corner is says: Loaded with errors on page...

 

thx in advance

forsaken
Posts: 2,800
Registered: ‎09-07-2006

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

Download the Setup wizard from here  also download the firmware for WRT54 v5.

 

Follow these steps to upgrade the firmware on the device
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.

Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

sjoerd327
Posts: 5
Registered: ‎09-04-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

wow, thx for the complete guide to solve this problem:smileyhappy:

 

will try it when i'm at my girlfriends parents place...the router is theirs...

 

will let you know if it's works.....

 

 

sjoerd327
Posts: 5
Registered: ‎09-04-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

ey i have a problem again,

i have problems finding and downloading the setup wizard, the firmware is no problem but it's a .BIN file and i have no clue what to do with that, mounting doesn't work so i have no way to patch my router....(so all the next steps are pointless)

 

can someone help me out with this?!

 

PS: the link in one of the posts above doesn't lead me to the download location....

 

thx!

 

thomasdb26
Posts: 1
Registered: ‎09-27-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

I am also trying to download the latest firmware version for router WRT54GS (V6) and it is coming up as a .BIN file.  This is not right.  Can someone from Linksys please post the correct file?

 

Also, the reason I am doing this is that my Wii no longer connects to my router after years of no issues.  Anyone familiar with this problem?  

 

Thanks

Expert
sabretooth
Posts: 5,334
Registered: ‎11-11-2008

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

The bin file is the firmware file.  Perform a firmware upgrade and just point to the bin file and it will upgrade.

Administrator
24JUAN80
Posts: 1,652
Registered: ‎04-06-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

Click here for a step by step procedure on how to upgarde your routers firmware.

------------------------------------------------------------------------------------
The Search Function is your friend.... and Google too.

How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router
------------------------------------------------------------------------------------
sjoerd327
Posts: 5
Registered: ‎09-04-2010

Re: not fully loaded configuration screen of a WRT54G v5 wifi router

ey guys,

 

thx for all the advise, althought it doesn't help me...

 

http://img256.imageshack.us/img256/8357/routerprobleem.png

 

i know how to update my firmware, the guide on the site is pretty clear, but when you open the picture link posted above, you can see what my real problem is.....

 

the router page doesn't open further than this, so i can't update my firmware using the procedure you guys shown me...

 

Thx again, hope for a good answer!