Reply
Expert
Posts: 14,260
Registered: ‎01-18-2013

Re: LAPAC1200 - no gigabit connection


jasoncollege24 wrote:

 

Basic settings for radio 2
Radio 1: Enabled
Network Mode: A/N/C-Mixed
Channel: 165 - 5.825GHz
Number of SSIDs: 1
No SSIDs are isolated
Max clients are 0

 

Advanced Parameters Radio 1
Worldwide Mode (802.11d): Enabled
Channel Bandwidth: 20/40/80MHz


Try "AC-only", channel 36 or 149 and "WPA2 Personal" not mixed.


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 7
Registered: ‎01-01-2018

Re: LAPAC1200 - no gigabit connection

Do you disconnect the POE Ethernet and connect the AP to a non POE port for this testing? only when testing with an AC adapter. I know the dangers of using POE, and the AC adapter at the same time. two of the above 5 tests were with POE, and 2 were with AC power.

 

I will try AC-Only for Radio 2, and I think all items connected to the B/G/N radio are at least N or higher. Could changing this to N only possibly help?

Expert
Posts: 14,260
Registered: ‎01-18-2013

Re: LAPAC1200 - no gigabit connection

[ Edited ]

Yes if a b/g device is connecting unexpectedly on the 2.4ghz.


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 7
Registered: ‎01-01-2018

Re: LAPAC1200 - no gigabit connection

Thanks! My issue appears to be resolved. Speeds from both radios are much closer to what's expected.