12-19-2017 02:25 AM
Hi - I have dedusted my WAP610N and connected it to the main network via a ZYXEL P8702 HUB. The WAP works great, but I can not configure it manually because the dynamic IP address (10.0.0.90) login does not respond.
IP Address : 10.0.0.90 MAC Address : 98-FC-11-AA-96-2F
Is there any way to configure WAP610 via Zyxel, or do I have to use my cascaded Linksys AE6350 / AC1200+ for this purpose ?? -E
Solved! Go to Solution.
12-19-2017 12:33 PM
You should be able to configure the WAP if you have the correct IP Address for it. I recommend setting static IP Addresses for APs' in network topology.