02-09-2018 08:17 AM
I have a two node system. My main node works fine both 5g and 2.4g devices come and go. On my secondary node 2.4 g works fine, but NOTHING will connect to it on 5g... Even if I'm standing next to it, and turn my wifi on and off again 5g will just keep dropping off until I walk away and it connects to 2.4 g. I've restarted the node both through the software as well as unplugged the node by hand. I've ran the channel tool. Nothing seems to fix it, I am running firmware 220.127.116.11309, I've checked through the velop admin tools that they are both running the same firmware.
02-09-2018 10:46 AM
They are like 20 ft apart, just on separate stories of the house, but I can surely try that, I thought the whole purpose was to put them apart for better coverage?
The 5Ghz backhaul between nodes could be failing due to building materials. 2.4Ghz can go though materials much better than 5Ghz. Also the radio signal radiates out sideways from the nodes so having nodes directly above each over will have much lower signals.
If the nodes are too close together the client will be fast transferred to the primary node.