Reply
Highlighted
Posts: 6
Registered: ‎09-30-2016
Accepted Solution

Bad Internet Throughput since 11/19/2017

Hi,

 

I got my 3 node velop system on 11/12/2017, and initially, it limited my downstream 1gb internet connection to about 200-300Mb.  Sometime overnight 11/12-13 Internet throughput jumped up to around 1gb, and I figure it was a new firmware downloaded as I had firmware updates set to automatic.

 

11/19 in the evening, my speeds dropped back down to 200-300Mb.  I figure this is due to the current firmware not playing well with Comcast's gigabit service.  Unfortunately, I don't know which firmware I had when things were going smoothly, just that everything changed on 11/19 and hasn't gotten better

 

Is there any way to roll back to a firmware other than 183316?  It seems to have slowed me down.  Perhaps the newer firmware that was pulled was the one working for me?

Posts: 234
Registered: ‎01-07-2012

Re: Bad Internet Throughput since 11/19/2017

If you need a previous version your bet is to contact support - or alternatively some of the friendly folks on here do have copies of previous versions.

Are your slave nodes wirelessly connected or wired/Ethernet? There are a number of us with various combinations that can probably point you are the right version.
Posts: 6
Registered: ‎09-30-2016

Re: Bad Internet Throughput since 11/19/2017

My slave nodes are wired

Posts: 6
Registered: ‎09-30-2016

Re: Bad Internet Throughput since 11/19/2017

It seems to turn off device prioritization solved my issues.