02-27-2017 11:01 AM
The blue light on one of my child nodes pulses blue about every 30 seconds. My setup is like this: one child node is using wired backhaul while the other child node is connected wireelessly to the main node. Only the wireless child node is experiencing the pulsing blue light.
I've reset, moved it, etc. I know that "blinking blue" normally means starting up, but mine pulses about every 30 seconds.
Can anyone help?
02-27-2017 11:13 AM
Login on the problem node via it's WebUI and check the firmware version is the latest 22.214.171.124155.
02-27-2017 11:19 AM
In the app under the node it will list it's IP Address.
Open a web browser on a computer and login the node using username admin and your local router's password. If you have a password failure try using the password admin as well.
The browser will open with a graphic of the Velop system in the center. Click the graphic will send you to another page with a "CA" link at the bottom. Click the "CA" link to get to the SmartWifi WebUI. Check the firmware version listed there.