Reply
Posts: 3
Registered: ‎10-02-2017

LRT224 Dual WAN Router and ip address area.

Wan1 ADSL router -> Wan1 led indicator blinking amber.

Wan2 4G router -> Wan2 led indicator blinking green.

 

Wan1 DHCP settings 192.168.11.69

Default gateway 192.168.11.1

DNS 192.168.11.1

 

Wan2 DHCP settings 192.168.8.100

Default gateway 192.168.8.1

DNS 192.168.8.1

 

LINKSYS Router DHCP settings

Device IP 192.168.11.1

Range start  192.168.11.10

Range end   192.168.11.99

 

Is it possible use same IP address area Wan1 and router ? Any harm (reason why led is amber)?

 

I have many devices (old network) 192.168.11.* area. That's why i change router ip area to same.

 

Hopely you understand!

 

Kivju

 

Expert
Posts: 13,604
Registered: ‎01-18-2013

Re: LRT224 Dual WAN Router and ip address area.


Kivju wrote:

 

Is it possible use same IP address area Wan1 and router ?

 


No you cannot have the same IP Subnet on any WAN the same as the Router LAN. This goes for all routers.


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Expert
Posts: 13,604
Registered: ‎01-18-2013

Re: LRT224 Dual WAN Router and ip address area.


Kivju wrote:

Wan1 ADSL router -> Wan1 led indicator blinking amber.

 

 


Do you have Load Balancing set to Failover and the Primary set to WAN2?


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Expert
Posts: 13,604
Registered: ‎01-18-2013

Re: LRT224 Dual WAN Router and ip address area.

Why not change Wan1 ADSL router LAN to IP Subnet 10.10.10.0/24 and LRT LAN to 192.168.11.0/24?


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 3
Registered: ‎10-02-2017

Re: LRT224 Dual WAN Router and ip address area.

Thank you for your response.

 

Ok, i will made change like you say but is this current configuration reason why led color is amber ?

And also is this reason why WAN1 is slow ?

 

Thanks

Kivju

Posts: 3
Registered: ‎10-02-2017

Re: LRT224 Dual WAN Router and ip address area.

Load Balancing and Primary is WAN1
Expert
Posts: 13,604
Registered: ‎01-18-2013

Re: LRT224 Dual WAN Router and ip address area.

You should enable Sticky Load Balancing in that case.

Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support