Reply
Posts: 1
Registered: ‎12-12-2016

Re: WUSB600N V2 Stopped working

Hello, i know this post is 5 years old. But i have exactly the same problem as you did. Did you manage to resolve the problem and if so, how? would greatly apreciate you help.
Expert
Posts: 14,287
Registered: ‎01-18-2013

Re: WUSB600N V2 Stopped working

  1. Download the Windows 7 driver of the Linksys support site
  2. With the WUSB600N plugged in open Control Panel => Device Manager, then click on the network adapter and uninstall it
  3. After the WUSB600N has been uninstalled unplug it from the computer
  4. Right click the downloaded driver zip file and select Extract All
  5. In the driver file list one is and inf file (*.inf); right click that file and select Install
  6. After the driver is installed plug the WUSB600N back in

Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 1
Registered: ‎04-02-2017

Re: WUSB600N V2 Stopped working

May be it's not your router problem

Have you check your laptop's card driver

Posts: 2
Registered: ‎05-28-2017

Re: WUSB600N V2 Stopped working

Are you running Kapersky AV?

Posts: 2
Registered: ‎07-08-2017

Re: WUSB600N V2 Stopped working

I have a similar but not the same problem.  Using Windows 10 and this adaptor has been working fine up until now.  But now, The blue LED remains continuously lit and in Device Manager it is not only being recognised, but says the device is working fine. Problem is, it's not working at all.  Tried updating the driver and it says I have the latest driver.

 

Anyone have any ideas?

 

Many thanks

 

Steve

Expert
Posts: 14,287
Registered: ‎01-18-2013

Re: WUSB600N V2 Stopped working

Did you try my previous post's instructions:

 

https://community.linksys.com/t5/Wireless-Adapters/WUSB600N-V2-Stopped-working/m-p/1073730#M35158


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 2
Registered: ‎07-08-2017

Re: WUSB600N V2 Stopped working

Hi chadster.... Thank you for your prompt reply.  I did as you suggested in your earlier post and installed netr28ux.inf and then plugged the adaptor back into the USB port.  No change unfortunately.... the LED is continuously lit and there is no internet connection.

Expert
Posts: 14,287
Registered: ‎01-18-2013

Re: WUSB600N V2 Stopped working

Try forgetting\removing the saved wireless network connection on the device and then reconnect.


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Highlighted
Posts: 1
Registered: ‎10-04-2017

Re: WUSB600N V2 Stopped working

I had the same problem and the reason was in Windows 7