Can anyone connect Squeezebox Radio to Cisco E4200 via WiFi? [ Edited ]

[diamar]

I've tried every combination with two different Squeezebox Radios to connect via WiFi to my E4200 with no luck. I have other Squeezebox devices that work fine, but the Radio just won't go.

Has anyone been able to do this??? If so, could you let me know your specific security settings so I can see if that's the problem?

Thanks,

--dave

[kawal]

do you configure the Squeezebox's wireless settings? or do you just have to let it detect the router's signal?

[diamar]

I've tried both auto and custom. When I get a dhcp error message from the squeezebox, the router shows that it's successully connected and the Squeezebox shows that it knows it's ip address, gateway and dns addresses.

[simorizk]

Did you get a resolution to this?  I am also having the same problem... I had to resort to a wired connection... Very dissapointed!!!

[wfandrea]

I got ot to work. Took a whole lot of experimenting with different settings. What worked for me was adjusting the wireless settings on the E4200: put the 5GHz-part to 'Only Wireless-N' and the 2,5GHz part to 'Only Wireless-G'. In the Security-settings I choose WPA2-PSK for both radios. See pics below (in Dutch, but I guess you can figure it out):

settings WiFi:

Settings Wifi-Security: