Reply
Expert
Posts: 13,603
Registered: ‎01-18-2013

Re: WRT32x and WRT3200ACM WiFi Issues


@wrote:
How do you disable IPv6 on the WRT32X? I want to try this and see if it fixes my 5Ghz disconnection issue.

For instructions see the below post:

 

https://community.linksys.com/t5/Wireless-Routers/WRT32x-IPV6-Issues/m-p/1271210#M347493


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 35
Registered: ‎01-12-2018

Re: WRT32x and WRT3200ACM WiFi Issues

^thanks Chad', but that is way too complicated for me. I thought it would be a simple setting in the dashboard.

 

 

So I have some interesting feedback on the WRT32X;

 

My max speed on my fibre connection is 100Mbps down and 40Mbps up.

 

On the WRT32X the fastest speed I could attain on the 5Ghz band was always approx 60Mbps. (down)  No matter what channel, band etc. Always ~60Mbps.

 

So out of curiosity, I plugged in my recently retired Netgear Nighthawk R7000. Straight away I am getting a rock solid ~95Mbps on the 5Ghz band.

 

And downloading updates to games or android apps is fast!   On the WRT32X, downloading an android app or update would take a long time. It crawled along, stopped, started, stopped...

 

 

So what is wrong with the Linksys WRT32X? Why is it so slow? Why does 5Ghz constantly drop out? Can this be fixed or did I waste my money?

Expert
Posts: 13,603
Registered: ‎01-18-2013

Re: WRT32x and WRT3200ACM WiFi Issues

I did some WRT32X speed testing on an isolated 1000mbps WAN connection with Priorization set manually to 1000mpbs for both upload and download speeds. All the tests are downloading. Speeds are roughly the same for the WRT3200ACM

 

#WAN to LAN Ethernet

root@McDebian3:~# iperf3 -c 192.168.200.1 -R -t 2
Connecting to host 192.168.200.1, port 5201
Reverse mode, remote host 192.168.200.1 is sending
[  4] local 192.168.1.6 port 48616 connected to 192.168.200.1 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   111 MBytes   933 Mbits/sec
[  4]   1.00-2.00   sec   112 MBytes   937 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-2.00   sec   224 MBytes   940 Mbits/sec    0             sender
[  4]   0.00-2.00   sec   223 MBytes   937 Mbits/sec                  receiver

iperf Done.

#WAN to WLAN Galaxy S5

Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.200.188, port 41731
[  5] local 192.168.200.1 port 5201 connected to 192.168.200.188 port 41732
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  5]   0.00-1.00   sec  45.7 MBytes   383 Mbits/sec    0   1.63 MBytes
[  5]   1.00-2.00   sec  47.5 MBytes   398 Mbits/sec   17   1.25 MBytes
[  5]   2.00-2.03   sec  1.25 MBytes   360 Mbits/sec    0   1.26 MBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  5]   0.00-2.03   sec  94.4 MBytes   390 Mbits/sec   17             sender
[  5]   0.00-2.03   sec  0.00 Bytes  0.00 bits/sec                  receiver
-----------------------------------------------------------

Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support
Posts: 16
Registered: ‎05-17-2017

Re: WRT32x and WRT3200ACM WiFi Issues

hi,

 

sorry off topic question, but, McDebian heve gui interface?

 

 

Thxs

EA-6200
WRT3200ACS
Posts: 16
Registered: ‎05-17-2017

Re: WRT32x and WRT3200ACM WiFi Issues

hi,

 

sorry off topic question, but, McDebian heve gui interface?

 

 

Thxs

EA-6200
WRT3200ACS
Highlighted
Expert
Posts: 13,603
Registered: ‎01-18-2013

Re: WRT32x and WRT3200ACM WiFi Issues


@wrote:

hi,

 

sorry off topic question, but, McDebian heve gui interface?

 

 

Thxs


No but there are Debian packages like Webmin that can suffice.

 

My throughput testing was done on the WRT32x with Linksys firmware (OpenWRT Custom). For the iperf3 server I used a WRT3200ACM running McDebian connected to the WAN port and a Debian Linux PC on the LAN for the WAN to LAN test. I just happened to name that Linux PC McDebian3.


Smiley Wink Please remember to Kudo those that help you.

Linksys
Communities Technical Support